What is An AD Converter?

What is an AD converter?  Well, “AD” means “analog-to-digital.”So an AD Converter is basically a translator for audio. It takes audio from one end and changes it to something a computer can understand, spitting that out the other end.

The result of analog-to-digital conversion is actually more common than you might realize.  Analog-to-digital converters go by quite a few names, including A-D converters, ADC, and A/D converters.

The reverse is also available, being a D-A converter, or DAC. D-A converters might be part of an interface box, such as with the Focusrite Scarlett 2i2 in the picture on the left above) or a separate component.

I’ll discuss their function shortly. As we’ve discussed recently (see the post 16-Bit Audio Recording – What The Heck Does It Mean?), analog is the physical, continuous signal that our bodies can make and understand (hear). Digital signals are the only thing computers can understand, so converting between the two signals is necessary for any modern recording project.

So What Is It?

There is no way for a computer to store an analog signal without it being first converted to a digital signal. Even though you may not have anything that you know as an ADC, it may be an internal component to other items. Even a cheap $5 PC mic has an ADC inside of it! Different qualities of converters make the conversion in different resolutions. The resolution of a converter is the same as the bit depth of the recording it produces.

Think of this “resolution” as the vocabulary that the converter can use to describe the analog information to the computer. An 8 bit recording only knows 256 words, while a 16 bit recording knows 65,536 words.

If that seems like a great improvement, how about 24 bit recordings which use over 16 million words? There’s not actually some robot inside each ADC writing wordy reviews of your recordings for the computer, but the reality isn’t too far off.  With higher bit depth and resolution, the digital recording will be much cleaner. You might not notice a huge difference between 16 and 24 bit recordings, but you will certainly be able to hear the difference between 8 and 16 bit.

Some A-D converters will also make the reverse conversion via the audio-out plug. Remember that humans can only understand analog signals, so it’s necessary to convert from the digital information on the computer and turn it into an analog signal for the speakers to turn into audible sound.

How Do I Convert My Audio?

The internal A-D converter that comes with some products is usually of moderate quality. The quality of your recordings will not be higher than your lowest quality piece of equipment, so an upgrade to a separate interface box will eventually be necessary.

There are plenty of options on different converters, so getting the right one for your home recording needs might not be as simple as it sounds. You might be surprised at how many different options there are.

You can start to get decent converters in audio interface boxes starting around $100 these days (not so only as recently as 5 years ago), but as with most things used in recording there are also cheaper versions and much more expensive versions available.  The Focusrite Scarlett Solo (which is an interface that happens to contain excellent AD converters) I mentioned at the beginning of the article runs about $110

RME ADI-2 FS 2-channel AD/DA Converter

Then at the very high end you have dedicated A-D/D-A converters like the RME ADI-2 FS 2-channel AD/DA Converter, which you can have for a mere $759. Of course this is not a full “interface.”

If you use a dedicated converter, you’ll need to ALSO have a microphone preamp. Most audio interface units these days (like the Scarlett I’ve mentioned a few times) have both the converter AND the mic preamplifier.

So go convert some sound into ones and zeros and make some awesome audio.

Cheers!

0 comments on “What is An AD Converter?”

Leave a Reply

Your email address will not be published. Required fields are marked *